Mud gun in Drilling Oil Rig System

Simple introduction on mud gun

The mud gun also can be called Mud mixing gun. It is usually used along with mud agitator as mixer for oil rig system.

Mud gun is consisted by main construction by steel pipe and flange, the valves including high pressure or low pressure and the rotary.

And the different oil rigs have different mud system, such as different on treating capacity, different on mud tank cap acity, difference on mud properties, ect. Then mud guns should hold relative height, etc.

1312352893a

The mud gun is simple in design or structure. Usually all turning takes place on double rows of steel balls in flame hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum.

Mud gun types

1. Divided by pressure: there will be high pressure and normal pressure;

2. Divided by rotary type: there will be with manual rotary or fixed type;

3. Divided by diameter: there will be NJQ50 and NJQ80;

4. Divided by nozzle number: there will be single one and triple one, etc;

5. Divided by valves: there will be gate valve type and butterfly valves type.

泥浆枪副本

Mud gun in Drilling oil rig system

Mud gun as we said, it will be used together with mud mixers. And the mud resources to mud gun is given by mud pump in oil rig. The mud gun can mix or spray mud to dead angles. This will make mud more even and better effect than mud agitator.

Moreover, the mud gun in Oil rig system also have normal pressure and high pressure. This is according to client’s demand. Different oil rig will request different mud gun. Please go and contact OGEM.

Drilling Oilfield Mud Gun

Oilfield mud gun is one of the equipments of solids control system,which is a special

tool to prevent mud sedimentation, oil field mud gun is mainly used for drilling mud in the

circulatory system. Return system equipment power source comes from the drilling mud

pump. Oil field mud gun so that no dead angle, the mud sedimentation tank. Oil field mud

gun equipment design for 360 degrees rotation. Each mud gun is arranged at the bottom

of the nozzle 3, 120 ° / A, for the radial jet. The upper tank and mud gun with manual rotary

lever (folding),which can be manually change the direction of the jet. The equipment has

the advantages of simple structure, flexible operation, easy to use . It is the ideal mud solid control system anti settling device.

Oil field mud gun is connected with the high voltage end of pump, using the high speed

jet drilling fluid flow, the fluid mud in mixing evenly which is to prevent settling lamination drilling liquid pool.

1312352893a

The Importance of Mud Gun in Solids Control System

Mud gun is designed and manufactured for the different drilling mud solids control 

system.The mud gun are classified into three kinds: low pressure; medium pressure; high

pressure, mainly to match with centrifugal pump,or mud pump, or the shear pump. It is to

clean the wall tube and to prevent the mud sediment in the mud tank.OGEM Solids Control

produce the solids control equipments.

The function of mud gun is depending on the gun body to produce a high speed liquid fluid,

which impact the drilling liquid storage tank bottom sediments to make the solid

suspended. At the same time, when the mud agitator stop a period of time, the solid buried

impeller deposition and need to restart, mud gun work can eliminate some resistance

moment agitator startup, this work provides a reliable guarantee for normal use of mud

agitator.Drilling fluid gun divided high pressure gun and low pressure gun,the high

pressure gun of suppling fluid by drilling pump,pressure from 4 to 6Mpa,low pressure gun

of suppling fluid by centrifugal pump.pressure from 0.2 to 0.3Mpa.

More info about our mud gun and solids control equipments,pls feel free to contact OGEM.

1312352893a

Mud Gun for Solids Control

The introduction of Mud Gun 

Mud gun, also called drilling mud gun, is the professional tool of oil drilling fluid solids control equipment, mainly for the mud system; The impetus of mud gun can come from either centrifugal pump or mud pump .

The number of mud gun depends on the size of tank. Usually mud gun installed with mud line of mud tank. According the inlet pipe size, there are 2’ mud gun and 3’ mud gun for option. According to different structure feature, there are two types of mud gun: fixed mud gun , and rotary mud gun.

1312352893a

OGEM NJQ Series Mud Gun

NJQ Series Mud gun is connected with the high pressure end of the mud pump,and with the drilling fluid jet by high speed to make the drilling mud in the mud tank agitated evenly.

Points for attention in use displacement
1. Pay attention to mud gun nozzle cleaning, prevent mud nozzle blockage.
2. Pay attention to mud gun valve adjustment, according to the density of the mud to adjust the valve size.

OGEM NJQ Series Mud Gun parameters

Name                                  Parameter

Model                                  NJQ50-3                             NJQ80-3

Diameter                             2"(φ50)                       3"(φ80)

Valve ID                                50mm                                80mm

Interface diameter                2"                                     3”

Working pressure               ≤1.6MPa                             ≤3.2MPa

Nozzles quantity                     3                                       3

Swivel degree                                              120°

Matching valves                      Gate valve and Butterfly Valve for option

If you want to know more info about our mud gun,pls do not hesitate to contact us.

 

Mud Gun for drilling fluid solids control

The introduction of Mud Gun

Mud gun, also called drilling mud gun, is the professional tool of oil drilling fluid solids control equipment, mainly for the mud system; The impetus of mud gun can come from either centrifugal pump or mud pump . Making use of high speed drilling fluid flow stir well mud pit to prevent precipitation.

泥浆枪副本

OGEM NJQ Series Mud Gun 

OGEM Solids Control  produces the mud gun with good spray effect , large clean area , simple structure, flexible operaion and easy to use .

NJQ Series mud gun parameters

Name Parameter
Model NJQ50-3                                         NJQ80-3
Diameter 2"(φ50)                                     3”(φ80)
Valve ID 50mm                                             80mm
Interface diameter 2"                                                  3”
Wroking pressure ≤1.6MPa                                       ≤3.2MPa
Nozzels quantity 3                                                    3
Swivel degree                          120°
Swivel                         Optional

1312352893a

If you are interested in our mud gun,pls contact us.We will try our best to serve you.

What is a mud gun in Solidscontrol?

What is a mud gun ?

A mud gun is a device used to agitate drilling mud on a drilling rig. More of a nozzle than a gun, a mud gun is connected to a pump to circulate the drilling mud and prevent the solids from settling in the mud tank.

The mud is mixed by being sucked into a pipe by a powerful pump and expelled back into the mud tank by being pushed through the nozzle of the mud gun. The process is similar to how a water jet works on a power washer.

 Mud Gun

 Mud Gun

is designed for use in a solids control system of a Drilling Rig .It is one kind of special tool which mainly uses for mixing drilling mud in the circulatory system and prevents the mud precipitates. The structure of equipment is simple, flexible Operation and easy using. A mud gun is the ideal equipment to guard against precipitates in a solids control system. The mud gun is installed in a mud tank.

Furthermore, it is usually used together with mud agitator. They have similar configuration principle on one mud tank.

NJQ Mud gun(1)

The principle and field of mud gun

Drilling mud is a wet substance that resembles a thick clay and is used to cool the drill head and carry the remnants of drilling to the surface in water well drilling and oil or gas drilling operations.

The mud is recycled by passing it through several filters or screens as it is circulated into the drill hole and back into the mud tanks on the drilling rig. In order to keep the mud as fluid as possible, a mud gun is used to keep the tank agitated and mixed. Mud is made by mixing water or oil with a clay-like substance that also contains numerous other chemicals into a large tank called the mud tank on a drilling rig.

 FSI Mud gun

Type

The type of mud used when drilling is dependent on the type of drilling that is being done. The mud gun is the same for whatever type of mud is being used. Often made by adding a type of nozzle onto a piece of pipe, the mud gun works much like placing a thumb over the end of a water hose.

This applies pressurized mud into the tank, causing it to create a mixing action. Agitating the mixture also aids in the removal of the cuttings from the mixture as it is filtered through the various screens in the tank.

泥浆枪副本

 Function 

The viscosity of the mud is very critical, with a thin mixture being unable to keep the cuttings from the drill head suspended until they reach the surface and can be screened out of the mixture. A mixture that is too thick can waste profits and can even slow the drilling productivity.

Another function of the mud gun is to maintain the suspension of the drilling cuttings so that they can be removed on the first pass through the screens. Cuttings that are not removed on the first pass through the screens can become broken up into smaller pieces that are more difficult to remove from the mixture.

So when you have any need on this , just feel free to contact us. Best price and services is waiting for you.

Professional Solid Control from China

Introduction of Solid Control

Solids control is a technique used for well drilling to provide prepared drilling fluids for drilling rigs. Drilling fluid maintenance cost, clean up, and disposal cost as well as the overall cost of boring can be reduced dramatically when proper solids control techniques are utilized.

]6DQ[1N{QEYE]BQA3WVWEDH

These facts were recognized in the oil industry in the late 19th century when open earthen pits were used to separate the cuttings from the borehole. This was accomplished by a series of weirs and settling pits that allowed the solids to naturally settle out by using gravity.

The clean mud then flowed into a suction pit to be re-pumped down the hole. This was the first solids control technique ever used.

The next innovation in solids control came when the shale shaker was introduced in the early 1930s for the oil industry. The shale shakers were derived from technology used in the mining industry. The shale shaker remains today the primary piece of solids control equipment utilized in the industry.

Another machine borrowed from the mining industry in the 1930s was the cone classifier or hydrocyclone. The basic principle of this device involves the centripetal forces brought about by the high velocity of the drilling fluid spinning in the cone, forcing the larger and heavier solids to settle outward toward the cyclone wall and downward toward the underflow solids discharge. Together with the shale shaker, hydrocyclones have become an integral part of today’s solid control system.

DSC03473_副本

OGEM Solid Control 

1. Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Equipment). OGEM is an integrated company specialized on design, produce, and sales mud process equipments and system

2. OGEM Equipment main application is O & G drilling solids control, HDD or trenchless mud recycling, CSM drilling fluid system, shielding mud process, slurry separation unit, pilling mud circulation, etc various mud process or solid separation industry.

3. OGEM products including shale shaker, high speed vibrating screen, mud cleaner, hydrocyclone desander/desilter, vacuum degasser/gas buster, drilling mud decanter centrifuge, drilling mud centrifugal pump, mud mixing pump, mud agitator/mixer, poor boy degasser/mud gas separator, flare igniter, shearing pump, submersible slurry pump, mud gun, mud tank, spare parts for mud equipments and system.

4. We have got ISO9001:2008 certificate. We produce and manage strictly according to ISO9001 standard. Pursue better result, from getting raw material to delivering complete products OGEM will give clients reliable quality, professional service, optimal solution.

5. OGEM set credit standing and quality as our root. We treat “Solidarity, Innovation, Pragmatism, Integrity” as company tenet and promote it among all staff. Customers’ satisfaction is OGEM ultimate aim. Please trust OGEM Equipment will cooperate with you on lasting mutual benefit basis.

DSC03476_副本

OGEM Superiority

  • Professional for mud process
  • Experienced engineer on solids control
  • Customer-oriented principle
  • High quality
  • Competitive price
  • ISO Certified company
  • Effective after-sale service

Any solid control equipment need, please feel free to contact us and we’ll do our utmost to serve you.

Drilling fluid mud gun on solids control

Brief introduction of Mud gun

Mud gun is another equipment for agitating drilling mud or fluid during mud process. It is mounted on mud tanks.?Mud gun?is also called as jet mud gun, mud gun jets, mud mixing gun, etc. Please find following info on ?both FSI Mud gun and OGEM Mud gun.

NJQ Mud gun

FSI MUD GUN GENERAL INFORMATION

1. FSI Mud gun main feature is the mud gun nozzles are made of rubber. This is different with other mud guns. FSI said, this rubber nozzle can be more durable and longer usable life.

2. Mud guns from FSI make it more efficient than the sharp shoulder in a 3 to 1 reducers. Well, under this feature we get increased blending and agitation

3. Fluid system design?mud guns?to solve pump problems more than to solve nozzle problems. ?Furthermore, we know, FSI mud gun is usually with only 1 nozzle. However, it can rotate as 270 degree.

4. FSI Mud gun is rather simple design with high quality meanwhile. Presently, most manufacturers adopt metal nozzles instead of rubber ones. We think, rubber won’t be more durable or wear resistant than steel.

OGEM Mud guns ref

OGEM JET MUD GUN DESCRIPTION

  • OGEM Mud gun including many types. Subject to the appearance. There will be?Spinner Type / Pivot Type, Non Spin Type,?Single nozzle and triple nozzle type and?Bottom type.
  • According to the working pressure or valve pressure, there can be high pressure and normal pressure type. The NJQ mud gun size including 2″ and 3″.?NJQ Mud gun is completely made of steel or S.S requested by clients. The nozzles are customizable on numbers and material.
  • The spinner type jet mud gun is designed for using in?mud tanks?where the utmost in constant agitation is desired. The nozzles are set at certain angle. Furnished in any desired length as specified in order.
  • While, the bottom type is similar with mud agitator with shaft stabilizer. We’ll set one piece of pipe to fix mud gun bottom small tail to ensure during operation, the mud gun will be steady. It is for large size metal tanks or mud pit. It’s simple construction, easy to install and operate.

Please be noted, discharge nozzles in all OGEM Jet mud?guns are eqiupped with insert process to make sure wear-resistant and long usable life.

FSI Mud gun

FSI MUD GUN VS OGEM MUD GUN

In short, both FSI and OGEM mud gun are similar. Actually, all mud gun are made based on same working principle or theory.

We can find, almost all mud guns are set as 1 gun per 3 meters. Also similar as mud agitator. FSI suggest users set one gun in the middle of 10′x10′ mud compartment even small

OGEM suggest you take mud gun together with?mud agitator. Since mud gun can provide complete and overcome the dead corner mud mixing.

FSI Mud guns and OGEM mud gun the main difference is the cost and the appearance design. In fact, both producers are professional on drilling mud solids control equipment.

?????

If you need more info on any FSI guns or OGEM NJQ Mud gun just contact us freely.

HDD Mud recycling system for sale

What’s HDD?

HDD is the horizontal directional drilling. It is one kind of no dig or trenchless drilling. What is HDD mud recycling system? Many new players in drilling industry or in HDD industry don’t understand about Mud recycling system. Let?s find interesting info as below:

HDD MUD RECYCLING SYSTEM GENERAL INFORMATION

]6DQ[1N{QEYE]BQA3WVWEDH

  • Horizontal directional drilling?is different with oil and gas drilling, water well drilling, etc. vertical drillings. So the mud process or solids control will be different also. The HDD mud process is called recycling since its point and issue is to recycle the drilling mud.

 

  • After processed by mud equipments, some of drilling mud will be used again and some of waste subject will be treated accordingly or delivered to certain place for other application.

 

  • To design HDD mud recycling system we usually consider the drilling rig size and name the mud system combine rig counter-expanding force, or based on mud pump flow rate.

 

100t Rig?Mud Recycling system for sale

 

1. At OGEM we have one 100T HDD mud recycling system for sale. The whole treating capacity is 200GPM. The main configuration is shale shaker, one mud tank, one set desilter, one slurry pump to feed shale shaker, one centrifugal feeding pump to feed desilter.

2. Furthermore, we configured mud mixing pump mounted on mud tank. The mixing hopper pump is combined with small Ventura?hopper and one 11KW centrifugal pump. The cost is about USD40000 for complete mud recycling system based on FOB Xingang, China.

3. We ever designed one 200GPM system for a client match their DRILLTOOLS rig. They are satisfied with our mud system. We know there will be many potential users on such mini mud recycling unit. Then we have finished it long time.

4. If you are interested please contact us for the latest price. Or you have any further questions just contact us freely.

Another HDD fluids system

Other HDD MUD SYSTEM FOR SALE AT OGEM

 

We OGEM is a professional manufacturer on solids control, including in petroleum industry oil and gas drilling, HDD mud process, mining or exploration slurry separation, waste management, etc.

OGEM can provide mud recycling system for following HDD rig. Including 45~60T rig, 100T rig, 200T HDD rig, 300T rig, and 450T rig. We can match our mud system for Varmeer rig, DRILLTOOL rig, and etc. many brands HDD rig.?As we said just now the “T” means the extension force.

The treating capacity can be from 200GPM~500GPM. These are common configurations used in HDD industry mud process. For each system the main difference is the treating capacity. General design and configuration is similar.

DSC03476

who makes?HDD mud system?

As we know, there is Mud puppy, Kemtron, DFE, OGEM, FSI, etc. ?They are experienced manufacturer and almost are world famous brand.

What do you need? What detail do you request? Please feel free to contact us.

Drilling fluids mud gun from China

Introduction?

Mud Gun?is designed for use in a?solids control?system of a Drilling Rig .It is one kind of special tool which mainly uses for mixing drilling mud in the circulatory system and prevents the mud precipitates. The structure of equipment is simple, flexible Operation and easy using. A mud gun is the ideal equipment to guard against precipitates in a solids control system. The mud gun is installed in a?mud tank.

Furthermore, it is usually used together with mud agitator. They have similar configuration principle on one mud tank?

Mud Gun

Simple information on mud gun

The mud gun also can be called mud mixing gun. As we know it is usually used along with mud agitator as mixers for oil rig in mud system.

The mud gun is consisted by main construction by steel pipe and flange, the valves (including high pressure or normal pressure), and the rotary parts.

The mud gun is simple in design or structure. Usually all turning takes place on double rows of steel balls in flame hardened races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum.

?

Mud gun types in OGEM

I. Divided by pressure. There will be high pressure and normal pressure.

II. Divided by rotary type. There will be with manual rotary or fixed type.

III. Divided by diameter. There will be 2? (NJQ50) and 3? (NJQ80).

IV. Divided by nozzle number. There will be single one and triple one, etc.

V. Divided by valves. There will be gate valve type and butterfly valve type.

 

?NJQ Mud gun common parameters

 

NJQ50 holds 2? diameter, and 2? valve can be butterfly or gate valve, then the connector size should be also 2?. The pressure can be normal pressure (0.6Mpa) or high pressure (1.6Mpa), the nozzle number will be customized as 3 or 1. And there will be rotation angle by manual rotation.

There is another common type NJQ80. Almost same with above one just the diameter, valve, connector, etc. dimension will be 3?.

On oil rig drilling mud system, the mud gun is usually fixed in active tank. However, we can design it subject to actual circumstance and situation or requirements by clients. Any questions on mud gun on oil rig in mud system please contact us-OGEM.

Mud gun is another equipment for agitating drilling mud or fluid during mud process. It is mounted on mud tanks.?Mud gun?is also called as jet mud gun, mud gun jets, mud mixing gun, etc. Please find following info on ?both FSI Mud gun and OGEM Mud gun.

NJQ Mud gun(1)

 

 

OGEM JET MUD GUN DESCRIPTION

  • OGEM Mud gun including many types. Subject to the appearance. There will be?Spinner Type / Pivot Type, Non Spin Type,?Single nozzle and triple nozzle type and?Bottom type.

 

  • According to the working pressure or valve pressure, there can be high pressure and normal pressure type. The NJQ mud gun size including 2″ and 3″.?NJQ Mud gun is completely made of steel or S.S requested by clients. The nozzles are customizable on numbers and material.

 

  • The spinner type jet mud gun is designed for using in?mud tanks?where the utmost in constant agitation is desired. The nozzles are set at certain angle. Furnished in any desired length as specified in order.

 

  • While, the bottom type is similar with mud agitator with shaft stabilizer. We’ll set one piece of pipe to fix mud gun bottom small tail to ensure during operation, the mud gun will be steady. It is for large size metal tanks or mud pit. It’s simple construction, easy to install and operate.

 

  • Please be noted, discharge nozzles in all OGEM Jet mud?guns are eqiupped with insert process to make sure wear-resistant and long usable life.

 

  • OGEM suggest you take mud gun together with?mud agitator. Since mud gun can provide complete and overcome the dead corner mud mixing.

 

  • FSI Mud guns and OGEM mud gun the main difference is the cost and the appearance design. In fact, both producers are professional on drilling mud solids control equipment.

 

If you need more info on any FSI guns or OGEM NJQ Mud gun just contact us freely.