Principle of operation and characteristic of mud shear pump

OGEM Solids Control mud shear pump is the newly designed equipment for fast mud

configuration and processing. It can meet the requirements of customers with high-

performance mud. The product can effectively mix and fully hydrate the material added

into the drilling fluid, which can save the added polymer and shorten mud configuration

time. As an ideal solid control device, the product can provide high quality drilling fluid for

drilling process. It can shear the high polymer in the drilling mud to ensure the polymer can

pass through the shale shaker screen.

The shear pump adopts a set of mechanical seal for no leakage at stuffing box. Inside

pump is a series stainless steel turbine containing nozzles, four scoops and shear plate.

Fifty percent of the fluid is sheared twice each time through the pump. This turbine shear

pump is mounted on a special base with belts and sheaves to drive pump, belt guard and

a explosion proof U/L approved electric motor. Included is a special hopper with nozzle

sized for this application and one mud kit as a package in order to build a complete shear

and hydration system. The pump is designed to give longer service life through the improved shaft seal. 

Welcome inquiry! ! !

剪切泵1_副本

JBQ series shearing pump

JQB Series Shearing Pump from China

Drilling mud shearing pump is one kind of centrifugal pump. It includes overhead belt, and centrifugal pump. Furthermore, some of oil drilling shearing pump will includes venturi hopper, overhead belt and centrifugal pump assembly.

Shearing pump general information

According to its feature, we also call it as overhead belt drive centrifugal pump. The JQB series shearing pump is suitable for hazardous and aggressive chemical service. It is capable for shearing oil drilling mud.

Usually, the shearing pump’s capacity can be 528GPM and 440GPM. The motors power will be 75HP or 60HP. This depends on the matching centrifugal pump power. The shearing pump is self-pumping, very compact and high efficient.

剪切泵1_副本

Oil rig shearing pump technique specs

It is single stage rotor/stator configurations as standard. For those applications that require greater shear, other special requirements can be customized configuration.

Product is made of national standard carbon steel from top steel company HBIS. Special materials available on request, such as contact parts can be S.S304, S.S316 even better.

This type oil rig shearing pump is wash down duty and explosion proof motors are available as standard. Inverted rated, stainless steel and other motors are available as optional extra.

剪切泵副本

Contact OGEM

Above information are main content on oil drilling mud shearing pump for sale. If you are interested or have further question please contact OGEM Equipment freely.

The shearing pump will be customized for you accordingly. Or provide you the high shear mixer for you. No matter you are user, agent, or trading company, just come to us getting your optimal solutions

 

The Four Major Functions of Shear Pump

1.Shear pump can greatly improve the hydration degree of soil particles moved.
Move the soil particle dispersion in water and hydration degree depends on: the electrolyte content, time, temperature, surface water quantity and concentration of substitutional cation.Keep the other conditions in the same, which can save more than 30% bentonite using shear pump.

2.Shear pump can make the polymer shear thinning, hydration as soon as possible.

3.The high molecular weight polymer using 3 in mud,which directly enter into the non hydratable, therefore the polymer to be pre shear. Shear pump can provide shear high efficiency, speed up the process of dilution water, polymer.

4.Shear pump can provide high capacity and head, which can meet the requirements of the preparation and processing of mud.Shear pump is to provide new equipment rapid preparation and processing of the mud, which can satisfy the user requirement of high performance slurry preparation. Drilling in the highly competitive market, and greatly shorten the mud preparation time, will bring good economic benefits to the enterprise.

OGEM Solids Control Equipment supply shear pump with high quality and low price.

So welecome to contact us about our shear pump or other solids control equipments.

剪切泵1_副本

Oil drilling mud shearing pump for sale

Drilling mud shearing pump is one kind of centrifugal pump. It includes overhead belt, and centrifugal pump. Furthermore, some of oil drilling shearing pump will include venturi hopper, overhead belt and centrifugal pump assembly.

Shearing Pump

Shearing pump general information

According to its feature, we also call it as overhead belt drive centrifugal pump. The JQB series shearing pump is suitable for hazardous and aggressive chemical service. Capable for shearing oil drilling mud.

Usually, the shearing pump capacity can be 528GPM and 440GPM. The motors power will be 75HP or 60HP. This depends on the matching cenrifugal pump power. The shearing pump is self-pumping, very compact and high efficient.

Oil rig shearing pump technique specs

Single stage rotor/stator configurations as standard. For those applications that require greater shear, other special requirements can be customized configuration.

Product is made of national standard carbon steel from top steel company HBIS. Special materials available on request. Such as contact parts can be S.S304, S.S316 even better.

This type oil rig shearing pump is wash down duty and explosion proof motors are available as standard. Inverted rated, stainless steel and other motors are available as optional extra.

剪切泵1_副本

For the feed inlet and output connections all sanitary or flange fittings available upon request

other design on oil drilling mud shearing pump

The oil drilling mud shearing pump is widely used in China and other overseas countries. However, the domestic shearing pump will be designed as only overhead belt centrifugal pump. Overseas users prefer the shearing pump combined with venturi hopper.

They call that type pump as jet shearing pump or high shear mixer. This combination is highly efficient and rapid in operation and capable of reducing mixing times. This configuration enables any machine to mix, emulsify, homogenize, solubilize, suspend, disperse and disintegrate solids.

Main benefits on oil drilling shear mixer are aeration free, Self-pumping, No bypassing, Easy maintenance, Eliminates agglomerates and fish eyes, Creates stable emulsions and suspension, Reduces particle size, rapidly dissolves solids, etc.

剪切泵副本

Above information are main content on oil drilling mud shearing pump for sale. If you are interested or have further question please contact OGEM Equipment freely.

Shearing Pump Manufacturer from China

Introduction of shearing pump

As one very important equipment within the drilling fluid circulating system, shearing pumps perform the dual function of cutting and pumping, making the drilling fluid ideally suited for every drilling requirements of reducing solids size and/or protection of its downstream equipments.

Shearing pump is used to shear, refine, and mix polymer, betonies drilling mud material. It can remove “fish eye” help drilling fluid achieve high property for oil drilling.

剪切泵1_副本

JQB series shear pump of OGEM

JQB series shear pump is a kind of new type equipment which provides the fast configuration and treatment mud for the user. Usually the users satisfy with configuration high performance mud.

This Shearing Pump can mix effectively and hydrate completely the material added in the drilling fluid, save the mud material, reduce the time of configuration, and provide the high performance mud for the well drilling. JQB series shearing pump can save over 30% betonies. It is ideal equipment for oil and gas drilling contractor.

 

JQB Series Shearing pump parameters

Modes

Flow rate

Head

Power Dimension Weight

JQB6545

120 m3/h

45m

55KW

1150×1100×1500mm

980kg

JQB6535

100 m3/h

35m

45KW

1150×1100×1250mm

800kg

Shearing Pump

JOB series shearing pump of OGEM for solids control

JQB series Shear Pump is a special purpose equipment of solids control system which can meet all customers’ requirements of preparing drilling fluid for the well drilling. This shear pump manufactured by OGEM Company is used to treat the high property mud, make the mud to obtain good rheological properties and cut the drilling cost as much as possible.

This ideal solids control equipment designed by OGEM’s engineer has high performance and gained customer’s high evaluation.

剪切泵副本

China manufacturer OGEM Solids Control offers the world with drilling shear pump equipments. We are an exporter of drilling fluid shear pump for the companies all over the world.

Our company is Quality Management System ISO 9001-2008 certified. OGEM Solids Control operates international oil gas drilling mud separation system sales, service, manufacturing, distribution service.

When you have any inquiry , just contact us directly.

 

 

 

 

Shearing Pump supplier from China

The form of Shearing Pump 

Shear pump adopts the axial suction, horizontal structure, composed of a motor, a pump seat, a pump shell, a worm gear, the shear wheel and a triangle belt transmission the power device, using a very reliable mechanical composite seal, to ensure no leakage.The internal of the pump is equipped with a stainless steel turbine (which has a main impeller, guide vane, nozzle, a collection chamber) and a shear plate.

The operation of Shearing Pump

Mud used in polymer of molecular weight high , directly add not easy hydration , if there is no sufficient shear, polymer during the first circulation may be jam shale shaker screen and will result in losing a lot of polymer, increase the cost of drilling, and also may make the drilling fluid in the large size of the particles harden and difficult to clear away . In the drilling fluid, due to no shear, the polymer will produce a lot of “fish eye”, these “fish-eye” will damage the formation, the formation permeability decrease, reduce the production of oil and gas .Therefore for polymers need preliminary shearing, then into the drilling fluid system, improving the performance of drilling fluid and full play its role .Shear pump can provide very high shearing efficiency, accelerate polymer dilution, hydration process.

AJSP Drilling mud shearing pump

OGEM JQB Series Shearing Pump can save more than 30% bentonite.OGEM Solid Control Equipment in the study of a large number of domestic and foreign shear pump based on the improvement of shearing pump, comprising a complete shear and hydration system, quick shear dilution, a hydratable polymer. It is the ideal equipment for oil and gas drilling contractor.

JQB Series Shearing Pump parameters

Model
Flow rate

Head
Motor
Dimension
Weight
JQB6545
120 m3/h
45m
55kW
1150×1100×1500mm
980kg
JQB6535
100 m3/h
35m
45kW
1150×1100×1250mm
800kg

Drilling mud tanks system from China

Drilling mud tanks system is the fluids process system completely with mud equipments and all tanks configuration. Following is some information on our high quality drilling mud tanks system.

Another HDD fluids system

Drilling fluid sytem description

For drilling mud tanks system we can use it in various drilling. The different well drilling conditions will request different fluids system.

Drilling fluid system including mud tanks system, the mud process equipments. All pipelines and electrical lines, cables, and all accessory parts. Such as the ladders, hand rail, guard rail, etc.

Fluids system equipment mainly is shale shaker, hydro cyclone separators, centrifuge decanter, centrifugal pumps, and fluid mixers/agitators.

DSC03476

Mud tanks detail

What is the mud tanks detail then? Actually, we need almost fluid system include shaker tank, active, storage tank or mixing tank. Sometimes, there will be also the trip tank, pill tank, and swab or test tank

The mud tanks are different size or dimension. It depends on whole mud tanks system capacity or flow mud pump flow rate. Whole mud system including different phases and process steps. We need to calculate all information in detail

So usually the single mud tank effective volume or capacity including 20m3 and less, 20-40m3, then 40-70m3. Their length can be 8m, 9m, 10m, 11m, 12m, 15m, etc. specific requirement.

Oil rig fluid purification system

How to make high quality mud tanks sytem

High quality mud tanks system must be fabricated under professional configuration. The optimal proposal with high efficiency and low cost. Cater to clients’ specific demand and actual drilling conditions.

All the equipments and tanks should be made of high quality raw material and produced according to executive standard. Inspect all equipments and tanks completely and strictly. Ensure all pipes are connected with each other. All welding line should be sealed and plain.

SK~I4KG[(KO2PX_{P{FY$5I

where to buy high quality mud tanks system?

Of course we need to find the professional producer. Experienced manufacturer and designer on mud process, solids control leaders

?In China, USA, New Zeeland, India, Russia, etc. So many regions and thousands of manufacturers. We can seek it at Google via internet also can seek it via friends and partners maybe even our clients.

2000HP rig mud system

OGEM Equipment is also one professional manufacturer on high quality mud tanks system. Complete solids control line closed loop mud recycling or circulation.

If you have any interest or demand please come to us for best price, high quality and shortest delivery.

 

Oilfield solids control pumps for sale

Solids control pumps information

Solids control system in oilfield is the typical 4 phase mud process system?including shale shaker, desander, desilter, centrifuge. What is the pumps info? What is solids control pump detail?

Oilfield centrifugal pump

As per complete close loop solids control mud system, there is feeding pump for hydrocyclone separators, the mud transfer pump for charging centrifuge, the drilling fluid mixing pump for configuration, and/or the shearing pump for shredding drilling mud, the trip pump, etc. We also can say, there is horizontal pump, vertical pump, screw pump, etc.

Different equipments request different pumps as power resource or mud supplies. Meanwhile, different solids control system configuration will have different pumps position, design, or types.

Detail pump in oilfield solids control

For solids control equipments, the separated hydrocyclone separators or mud cleaner we must match centrifugal pump as mud feeding pump. The centirfugal pump transfer drilling fluid to the cyclones inlet line for subsequent process.

??2_??

Usually, these pumps are horizontal one. They’ll be mounted on mud tanks ends or under the slant plate of shaker tank. ?When we set pumps under shaker tank will save much space. However, then it will be inconvenient when we repair or inspect pumps.

But sometimes in solids control system there will be vertical pump or submersible slurry pump instead of horizontal pumps.

We know in solids control system, the drilling mud seems blood to our human body. While pump will be the transfer tools. They pump drilling fluid from here there between different drilling fluid tanks or compartments.

Let?s see, after mud cleaner or hydrocyclone desilter what pumps there? Yes, the 4th solids control equipment-Decanter centrifuge. For decanter centrifuge, we need pump transfer drilling fluid from desilter compartment to centrifuge input.

The drilling mud can be pumped by horizontal centrifugal pump, or the vertical centrifugal pump. We also may call it slurry submersible slurry pump. Some clients will also request the screw pump for feeding centrifuge.

??????

In fact, during communicate with clients; we’ll propose proper pumps or configuration for them. Upon their satisfaction on both technique and cost we’ll confirm the optimal solutions on pumps and every other issue

The mixing pump and shearing pump? They have similarity. Both them are combined with centrifugal pump and another part. And they both can mix / compound drilling fluid for solids control system.

???1_??

The mixing pump is including the centrifugal pump and mixing hopper, which can be venture hopper or vortex hopper.?While the solids control shearing pump including the centrifugal pump and over-head belt.

Yes, another pump is the trip pump. It is also centrifugal pump. And we set it on the trip tank. It can supplement drilling fluid for shaker or the former equipments.

Solids Control pumps manufacturer

How to get high quality oilfield solids control pumps? Where are the pumps for sale? Who is the pumps manufacturer?

Please come to OGEM. Right here you’ll get all kinds of oilfield solids control pumps. You’ll get high quality products at lower price. If you have detail requirements we’ll give you best offer with short delivery.

Why not contact OGEM Equipment now?

 

Shearing pump for solids control from OGEM Equipment

 

JQB series Shearing Pump

JQB series Shearing Pump is a kind of new tape equipment which provides the fast configuration and treatment mud for the users. The users satisfy with configuration high performance mud. This series Shearing Pump can mix effectively and hydrate completely the material added in the drilling fluid, save the mud material, reduce the time of configuration, and provide the high performance mud for the?well drilling.

Shearing Pump

Features

  • Sufficient power and pressure
  • Small footprint
  • Break down drilling mud block
  • High quality raw material
  • Excellent dilution and hydration ability

Benefits

  • Make drilling fluid transfer effectively
  • Use less space, get more effective tank capacity
  • Get more even drilling fluid
  • Durable and low cost on maintenance
  • Save much cost on drilling mud cost
    Technique parameters

Model

JQB 6545

JQB 6535

Flow rate

120 m3/h

100 m3/h

Head

45m

35m

Power

55KW

45KW

Dimension

1150?1100?1500mm

1150?1100?1250mm

Weight

980kg

800kg

 

Shearing pump for drilling fluids solids control

JQB series Shearing Pump is a special purpose equipment of solids control system which can meet all customers? requirements of preparing drilling fluid for the well drilling. This shearing pump manufactured by OGEM Company is used to treat the high property mud, make the mud to obtain good rheological properties and cut the drilling cost as much as possible. This ideal solids control equipment designed by OGEM?s engineers has?high performance and gained customer?s high evaluation.

???1

China manufacturer OGEM Solids Control offers the world with drilling shearing pump equipments. We are an exporter of drilling fluid shearing pump for Indian, Russian, and the Middle East etc. Oilfield Company of the Turkey Venezuela, Indonesia, Russia, the United Arab Emirates, Turkey, and Morocco and Century Int’l Oilfield Equipments LLC of the United Arab Emirates etc. Our company is Quality Management System ISO 9001-2008 certified.

 

OGEM Solids Control operates international oil gas drilling mud separation system sales, service, manufacturing, distribution service. You can contact us for the detailed information when you need.

 

HDD Mud recycling system for sale

What’s HDD?

HDD is the horizontal directional drilling. It is one kind of no dig or trenchless drilling. What is HDD mud recycling system? Many new players in drilling industry or in HDD industry don’t understand about Mud recycling system. Let?s find interesting info as below:

HDD MUD RECYCLING SYSTEM GENERAL INFORMATION

]6DQ[1N{QEYE]BQA3WVWEDH

  • Horizontal directional drilling?is different with oil and gas drilling, water well drilling, etc. vertical drillings. So the mud process or solids control will be different also. The HDD mud process is called recycling since its point and issue is to recycle the drilling mud.

 

  • After processed by mud equipments, some of drilling mud will be used again and some of waste subject will be treated accordingly or delivered to certain place for other application.

 

  • To design HDD mud recycling system we usually consider the drilling rig size and name the mud system combine rig counter-expanding force, or based on mud pump flow rate.

 

100t Rig?Mud Recycling system for sale

 

1. At OGEM we have one 100T HDD mud recycling system for sale. The whole treating capacity is 200GPM. The main configuration is shale shaker, one mud tank, one set desilter, one slurry pump to feed shale shaker, one centrifugal feeding pump to feed desilter.

2. Furthermore, we configured mud mixing pump mounted on mud tank. The mixing hopper pump is combined with small Ventura?hopper and one 11KW centrifugal pump. The cost is about USD40000 for complete mud recycling system based on FOB Xingang, China.

3. We ever designed one 200GPM system for a client match their DRILLTOOLS rig. They are satisfied with our mud system. We know there will be many potential users on such mini mud recycling unit. Then we have finished it long time.

4. If you are interested please contact us for the latest price. Or you have any further questions just contact us freely.

Another HDD fluids system

Other HDD MUD SYSTEM FOR SALE AT OGEM

 

We OGEM is a professional manufacturer on solids control, including in petroleum industry oil and gas drilling, HDD mud process, mining or exploration slurry separation, waste management, etc.

OGEM can provide mud recycling system for following HDD rig. Including 45~60T rig, 100T rig, 200T HDD rig, 300T rig, and 450T rig. We can match our mud system for Varmeer rig, DRILLTOOL rig, and etc. many brands HDD rig.?As we said just now the “T” means the extension force.

The treating capacity can be from 200GPM~500GPM. These are common configurations used in HDD industry mud process. For each system the main difference is the treating capacity. General design and configuration is similar.

DSC03476

who makes?HDD mud system?

As we know, there is Mud puppy, Kemtron, DFE, OGEM, FSI, etc. ?They are experienced manufacturer and almost are world famous brand.

What do you need? What detail do you request? Please feel free to contact us.