Slurry pump from OGEM Solidscontrol

A Slurry pump is a type of centrifugal pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energyv.

 Types

Grouped by

  1. impeller quantity: single stage and multistage slurry pump
  2. shaft position from the horizontal: horizontal and vertical slurry pump
  3. impeller suction way: single suction and double suction slurry pump
  4. pump casing structure: solid casing, horizontal split-case, and vertical split-case slurry pump

QQ截图20131202144500

Applications

Slurry pump are widely used to transport corrosive/abrasive and high concentration slurry in many industries such as:

Gold, Silver, iron ore, Lead&Zinc, Mineral sands, Tin, Steel, Titanium, Molybdenum, Copper, Electric Utilities, Oil Shale, Water&Sewage Utilities, Building areas, Coal, Sand&Gravel, Tobacco, Agriculture (hog, poultry, dairy manure), etc.

Components

Impeller

The impeller, either elastomer or high-chrome material, is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.

Casing

Split outer casing halves of cast contain the wear liners and provide high operation pressure capabilities. The casing shape is generally of semi-volute or concentric, efficiencies of which are less than that of the volute type.

Shaft and Bearing Assembly

A large diameter shaft with a short overhang minimizes deflection and vibration. Heavy-duty roller bearing are housed in a removable bearing cartridge.

Shaft sleeve

A hardened, heavy-duty corrosion-resistant sleeve with O-ring seals at both ends protects the shaft. A split fit allows the sleeve removed or installed quickly.

Shaft Seal

Expeller drive seal, Packing seal, Mechanical seal

Drive Type

V-belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices

Performance parameters

  1. Capacity
  2. Head
  3. Solids handling capacity
  4. Efficiency and Power
  5. Speed
  6. NPSH

QQ截图20131202144624

The above parameters are determined before selecting appropriate slurry pump.

OGEM submersible slurry pumps are stand out for these advantages, it’s your best choice. Just go for us, best service is waiting for you.

 

YZ Submersible slurry pump in Oil & Gas drilling

Brief Introduction

YZ Submersible slurry pump is with structure of vertical single stage and single suction system overhung centrifugal pump. It is made of abrasion-resistant alloy, It can convey medium with high concentration particle.

There is no bearing and Gland Seal between impeller and pump body, so the slurry pump is maintenance-free and high temperature resistance, the slurry pump is the ideal centrifugal pump for Feeding Shale Shaker from Mud Pit for HDD Mud Recycling.

QQ截图20131202144500

Model Flow rate Head Speed Efficiency Motor power
m3/h L/S m RPM %  KW
50YZ40-12 25 6.9 12 1430 39.5 3
50YZS36-50 36 10 50 1470 34 22
80YZ40-10 24 6.7 11.5 960 39 3
80YZ50-10 30 8.3 16 970 24 7.5
100YZ100-30 60 16.7 36 1470 41 22
100YZ120-60 72 20 61 1480 38 55
150YZ280-20 168 46.7 21 980 47 37

Pump’s drive type: The slurry pump is connected through the flexible coupling and the electric motor, the pump direction of rotation is clockwise from the prime move.

YZ Submersible slurry pump structure

YZ Slurry  Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the  pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles.

QQ截图20131202144624

The length of inserting the water by slurry pump is between 800 and 2000; the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

Buy submersible slurry pump from China manufacturer, OGEM Solids Control system submersible slurry pump. OGEM submersible slurry pump can be used in environmental protective, civil construction, power plant, oil refinery, mineral, cement factory, etc. industry.

It can pump various fluid with corrosiveness and particles, such as sludge, oil dregs, etc. Mud tank submersible slurry pump.

液下渣浆泵1_副本

Your best submersible slurry pump for drilling mud circulation system, just go  for OGEM .

Submersible Slurry Pump for solids control

The introduction of Submersible Slurry Pump

Submersible slurry pump is the single suction and phase cantilever type centrifugal pump.The impeller is semi-open.It’s main feature is the extreme strong pump shaft under the liquid.There is no bearing and seals between impeller and pump case,it is a maintenance-free pump.

Submersible pump

OGEM Solids Control according to the international advanced solid liquid two phase flow theory and optimized principle to design the submersible slurry pump.

1. The geometrical shape of flow passage component conform the flow condition of medium, reduce the eddy current and impact, thus reduce the wear and tear of the flow passage component, improve the hydraulic efficiency, and reduce the running noise and vibration.

2. Using the power step-down, to ensure the slurry is not easy to leak.

3. Flow passage component of pump uses high hard alloy, the material has the advantages of high wear resistance, corrosion resistance, shock resistance and long service life.

Buy submersible slurry pump from China manufacturer,OGEM Solids Control system submersible slurry pump.We will supply the best service for you.

 

Supply Submersible Slurry Pump in Solid Control from China

Brief Introduction of Submersibe Slurry Pump

Submersible slurry pump is used in drilling fluid solids control system to pump the thick liquid, thick oil, oil residue, dirty fluid, mud and fluid which contains clay sand slag and corrosive fluid.

OGEM submersible slurry pump can be used in environmental protective,civil construction,power plant,oil refinery,mineral,cement factory,etc.industry.It can pump various fluid with corrosiveness and particles,such as sludge,oil dregs,etc.

Submersible pump

Form of Submersible Slurry Pump

Submersible slurry pump is with structure of vertical single stage and single suction overhung centrifugal pump. The impeller is semi-open type, equipped with paddle wheel in the impeller suction side extension place. Vertical machine is installed on the motor cabinet, and connected with the pump by coupler. Submerged part of the pump shaft has enough rigidity, there is no bearing and gland seal between the impeller and pump body, it can transport the medium with high concentration particles. The length of pump inserts submerged is 800mm~2500mm, and can be equipped with suction pipe if needed.

OGEM Solid Control Equipment according to the international advanced solid liquid two phase flow theory and optimized principle to design the submersible slurry pump.

1. The geometrical shape of flow passage component conform the flow condition of medium, reduce the eddy current and impact, thus reduce the wear and tear of the flow passage component, improve the hydraulic efficiency, and reduce the running noise and vibration.

2. Using the power step-down, to ensure the slurry is not easy to leak.

3. Flow passage component of pump uses high hard alloy, the material has the advantages of high wear resistance, corrosion resistance, shock resistance and long service life.

OGEM YZ Series Submersible Slurry Pump parameters

Model Flow rate Head Speed Efficiency  

Motor power

m3/h L/S (m) (r/min) (%) (KW)
50YZ25-12 25 6.9 12 1430 39.5 3
50YZ50-20 50 14 20 1440 46 7.5
50YZ36-50 36 10 50 1470 34 22
50YZ36-50A 33 9.2 42 1470 33 18.5
65YZ50-12 50 13.8 12 1440 55.9 5.5
65YZ50-12A 48 13.3 10.8 1440 55.4 5.5
80YZ80-20B 68 18.9 15 1460 53 7.5
80YZ80-20A 73 20.3 17.5 1460 53 11
80YZ80-20 80 22.2 21 1460 55 11
100YZ100-30A 100 30.6 30 1470 54 18.5
100YZ100-30 100 27.8 31 1470 54 22
100YZ120-60A 120 33 50 1480 49 45
100YZ160-38 160 44.4 39 1480 52 45
150YZ250-40B 200 55.6 25 1480 49 37
150YZ250-40 300 83.3 38 1480 52 55

If you want to know more infos,can contact us.

Professional Solid Control from China

Introduction of Solid Control

Solids control is a technique used for well drilling to provide prepared drilling fluids for drilling rigs. Drilling fluid maintenance cost, clean up, and disposal cost as well as the overall cost of boring can be reduced dramatically when proper solids control techniques are utilized.

]6DQ[1N{QEYE]BQA3WVWEDH

These facts were recognized in the oil industry in the late 19th century when open earthen pits were used to separate the cuttings from the borehole. This was accomplished by a series of weirs and settling pits that allowed the solids to naturally settle out by using gravity.

The clean mud then flowed into a suction pit to be re-pumped down the hole. This was the first solids control technique ever used.

The next innovation in solids control came when the shale shaker was introduced in the early 1930s for the oil industry. The shale shakers were derived from technology used in the mining industry. The shale shaker remains today the primary piece of solids control equipment utilized in the industry.

Another machine borrowed from the mining industry in the 1930s was the cone classifier or hydrocyclone. The basic principle of this device involves the centripetal forces brought about by the high velocity of the drilling fluid spinning in the cone, forcing the larger and heavier solids to settle outward toward the cyclone wall and downward toward the underflow solids discharge. Together with the shale shaker, hydrocyclones have become an integral part of today’s solid control system.

DSC03473_副本

OGEM Solid Control 

1. Tangshan Aojie Petroleum Machinery Equipment Make Co., Ltd (Short for: OGEM Equipment). OGEM is an integrated company specialized on design, produce, and sales mud process equipments and system

2. OGEM Equipment main application is O & G drilling solids control, HDD or trenchless mud recycling, CSM drilling fluid system, shielding mud process, slurry separation unit, pilling mud circulation, etc various mud process or solid separation industry.

3. OGEM products including shale shaker, high speed vibrating screen, mud cleaner, hydrocyclone desander/desilter, vacuum degasser/gas buster, drilling mud decanter centrifuge, drilling mud centrifugal pump, mud mixing pump, mud agitator/mixer, poor boy degasser/mud gas separator, flare igniter, shearing pump, submersible slurry pump, mud gun, mud tank, spare parts for mud equipments and system.

4. We have got ISO9001:2008 certificate. We produce and manage strictly according to ISO9001 standard. Pursue better result, from getting raw material to delivering complete products OGEM will give clients reliable quality, professional service, optimal solution.

5. OGEM set credit standing and quality as our root. We treat “Solidarity, Innovation, Pragmatism, Integrity” as company tenet and promote it among all staff. Customers’ satisfaction is OGEM ultimate aim. Please trust OGEM Equipment will cooperate with you on lasting mutual benefit basis.

DSC03476_副本

OGEM Superiority

  • Professional for mud process
  • Experienced engineer on solids control
  • Customer-oriented principle
  • High quality
  • Competitive price
  • ISO Certified company
  • Effective after-sale service

Any solid control equipment need, please feel free to contact us and we’ll do our utmost to serve you.

Submersible slurry pump in Solids control

OGEM YZ Series Slurry pump

YZ Submersible slurry pump is with structure of vertical single stage and single suction system overhung centrifugal pump,it is made of abrasion-resistant alloy,it canconvey medium with high concentration particle.

There is no bearing and Gland Seal between impeller and pump body,so the slurry pump is maintenance-free and high temperature resistance,the slurry pump is the ideal centrifugal pump for

  • Feeding Shale Shaker from Mud Pit for HDD Mud Recycling
  • Feeding Desander Desilter
  • Feeding Decanting Centrifuge
  • Mining Slurry Separation System

DSCI0368_副本

Submersible Slurry Pump

YZ Submersible slurry pump Technical parameters:

Model

 Flow

 Lift

 Speed

 Efficiency

Match motor

m3/h

(m)

(r/min)

(%)

(KW)

50YZ25-12

25

12

1430

39.5

3

 50YZ50-20

50

20

1440

46

7.5

50YZ36-50

36

50

1470

34

22

50YZ36-50A

33

42

1470

33

18.5

65YZ50-12

50

12

1440

55.9

5.5

65YZ50-12A

48

10.8

1440

55.4

5.5

 80YZ80-20B

68

15

1460

53

7.5

 80YZ80-20A

73

17.5

1460

53

11

100YZ100-30

100

31

1470

54

22

 100YZ120-60A

120

50

1480

49

45

150YZ250-40

300

38

1480

52

55

YZ  – Vertical Submersislbe slurry pump

80 – Pump outlet diameter (mm)

80–Pump design flow rate (m ³ / h)

20 –Pump design head (m)

A –Impeller first to be cut less

DSCI0370_副本

Pump’s drive type:

The slurry pump is connecting through the flexible coupling and the electric motor, the pump direction of rotation is clockwise from the prime move.

YZ Submersible slurry pump structure

YZ Slurry  Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the  pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles.

The length of inserting the water by slurry pump is between 800 and 2000, the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

 Submersible pump

Buy submersible slurry pump from China manufacturer, OGEM Solids Control system submersible slurry pump.

Mud tank submersible slurry pump.Your best submersible slurry pump for drilling  mud circulation system. 

Drilling mud tanks system from China

Drilling mud tanks system is the fluids process system completely with mud equipments and all tanks configuration. Following is some information on our high quality drilling mud tanks system.

Another HDD fluids system

Drilling fluid sytem description

For drilling mud tanks system we can use it in various drilling. The different well drilling conditions will request different fluids system.

Drilling fluid system including mud tanks system, the mud process equipments. All pipelines and electrical lines, cables, and all accessory parts. Such as the ladders, hand rail, guard rail, etc.

Fluids system equipment mainly is shale shaker, hydro cyclone separators, centrifuge decanter, centrifugal pumps, and fluid mixers/agitators.

DSC03476

Mud tanks detail

What is the mud tanks detail then? Actually, we need almost fluid system include shaker tank, active, storage tank or mixing tank. Sometimes, there will be also the trip tank, pill tank, and swab or test tank

The mud tanks are different size or dimension. It depends on whole mud tanks system capacity or flow mud pump flow rate. Whole mud system including different phases and process steps. We need to calculate all information in detail

So usually the single mud tank effective volume or capacity including 20m3 and less, 20-40m3, then 40-70m3. Their length can be 8m, 9m, 10m, 11m, 12m, 15m, etc. specific requirement.

Oil rig fluid purification system

How to make high quality mud tanks sytem

High quality mud tanks system must be fabricated under professional configuration. The optimal proposal with high efficiency and low cost. Cater to clients’ specific demand and actual drilling conditions.

All the equipments and tanks should be made of high quality raw material and produced according to executive standard. Inspect all equipments and tanks completely and strictly. Ensure all pipes are connected with each other. All welding line should be sealed and plain.

SK~I4KG[(KO2PX_{P{FY$5I

where to buy high quality mud tanks system?

Of course we need to find the professional producer. Experienced manufacturer and designer on mud process, solids control leaders

?In China, USA, New Zeeland, India, Russia, etc. So many regions and thousands of manufacturers. We can seek it at Google via internet also can seek it via friends and partners maybe even our clients.

2000HP rig mud system

OGEM Equipment is also one professional manufacturer on high quality mud tanks system. Complete solids control line closed loop mud recycling or circulation.

If you have any interest or demand please come to us for best price, high quality and shortest delivery.

 

Oilfield solids control pumps for sale

Solids control pumps information

Solids control system in oilfield is the typical 4 phase mud process system?including shale shaker, desander, desilter, centrifuge. What is the pumps info? What is solids control pump detail?

Oilfield centrifugal pump

As per complete close loop solids control mud system, there is feeding pump for hydrocyclone separators, the mud transfer pump for charging centrifuge, the drilling fluid mixing pump for configuration, and/or the shearing pump for shredding drilling mud, the trip pump, etc. We also can say, there is horizontal pump, vertical pump, screw pump, etc.

Different equipments request different pumps as power resource or mud supplies. Meanwhile, different solids control system configuration will have different pumps position, design, or types.

Detail pump in oilfield solids control

For solids control equipments, the separated hydrocyclone separators or mud cleaner we must match centrifugal pump as mud feeding pump. The centirfugal pump transfer drilling fluid to the cyclones inlet line for subsequent process.

??2_??

Usually, these pumps are horizontal one. They’ll be mounted on mud tanks ends or under the slant plate of shaker tank. ?When we set pumps under shaker tank will save much space. However, then it will be inconvenient when we repair or inspect pumps.

But sometimes in solids control system there will be vertical pump or submersible slurry pump instead of horizontal pumps.

We know in solids control system, the drilling mud seems blood to our human body. While pump will be the transfer tools. They pump drilling fluid from here there between different drilling fluid tanks or compartments.

Let?s see, after mud cleaner or hydrocyclone desilter what pumps there? Yes, the 4th solids control equipment-Decanter centrifuge. For decanter centrifuge, we need pump transfer drilling fluid from desilter compartment to centrifuge input.

The drilling mud can be pumped by horizontal centrifugal pump, or the vertical centrifugal pump. We also may call it slurry submersible slurry pump. Some clients will also request the screw pump for feeding centrifuge.

??????

In fact, during communicate with clients; we’ll propose proper pumps or configuration for them. Upon their satisfaction on both technique and cost we’ll confirm the optimal solutions on pumps and every other issue

The mixing pump and shearing pump? They have similarity. Both them are combined with centrifugal pump and another part. And they both can mix / compound drilling fluid for solids control system.

???1_??

The mixing pump is including the centrifugal pump and mixing hopper, which can be venture hopper or vortex hopper.?While the solids control shearing pump including the centrifugal pump and over-head belt.

Yes, another pump is the trip pump. It is also centrifugal pump. And we set it on the trip tank. It can supplement drilling fluid for shaker or the former equipments.

Solids Control pumps manufacturer

How to get high quality oilfield solids control pumps? Where are the pumps for sale? Who is the pumps manufacturer?

Please come to OGEM. Right here you’ll get all kinds of oilfield solids control pumps. You’ll get high quality products at lower price. If you have detail requirements we’ll give you best offer with short delivery.

Why not contact OGEM Equipment now?

 

HDD Mud recycling system for sale

What’s HDD?

HDD is the horizontal directional drilling. It is one kind of no dig or trenchless drilling. What is HDD mud recycling system? Many new players in drilling industry or in HDD industry don’t understand about Mud recycling system. Let?s find interesting info as below:

HDD MUD RECYCLING SYSTEM GENERAL INFORMATION

]6DQ[1N{QEYE]BQA3WVWEDH

  • Horizontal directional drilling?is different with oil and gas drilling, water well drilling, etc. vertical drillings. So the mud process or solids control will be different also. The HDD mud process is called recycling since its point and issue is to recycle the drilling mud.

 

  • After processed by mud equipments, some of drilling mud will be used again and some of waste subject will be treated accordingly or delivered to certain place for other application.

 

  • To design HDD mud recycling system we usually consider the drilling rig size and name the mud system combine rig counter-expanding force, or based on mud pump flow rate.

 

100t Rig?Mud Recycling system for sale

 

1. At OGEM we have one 100T HDD mud recycling system for sale. The whole treating capacity is 200GPM. The main configuration is shale shaker, one mud tank, one set desilter, one slurry pump to feed shale shaker, one centrifugal feeding pump to feed desilter.

2. Furthermore, we configured mud mixing pump mounted on mud tank. The mixing hopper pump is combined with small Ventura?hopper and one 11KW centrifugal pump. The cost is about USD40000 for complete mud recycling system based on FOB Xingang, China.

3. We ever designed one 200GPM system for a client match their DRILLTOOLS rig. They are satisfied with our mud system. We know there will be many potential users on such mini mud recycling unit. Then we have finished it long time.

4. If you are interested please contact us for the latest price. Or you have any further questions just contact us freely.

Another HDD fluids system

Other HDD MUD SYSTEM FOR SALE AT OGEM

 

We OGEM is a professional manufacturer on solids control, including in petroleum industry oil and gas drilling, HDD mud process, mining or exploration slurry separation, waste management, etc.

OGEM can provide mud recycling system for following HDD rig. Including 45~60T rig, 100T rig, 200T HDD rig, 300T rig, and 450T rig. We can match our mud system for Varmeer rig, DRILLTOOL rig, and etc. many brands HDD rig.?As we said just now the “T” means the extension force.

The treating capacity can be from 200GPM~500GPM. These are common configurations used in HDD industry mud process. For each system the main difference is the treating capacity. General design and configuration is similar.

DSC03476

who makes?HDD mud system?

As we know, there is Mud puppy, Kemtron, DFE, OGEM, FSI, etc. ?They are experienced manufacturer and almost are world famous brand.

What do you need? What detail do you request? Please feel free to contact us.

Sluury pump manufacturer from China

A brief introduction of OGEM slurry pump

OGEM?s slurry pumps are heavy and robust centrifugal pumps, capable of handling tough and abrasive duties. They are designed for excellent performance, low energy consumption, long wear life and easy maintenance. Various designs are available to cover all hydraulic transportation needs in the widest variety of process applications including grinding circuits, tailings disposal, filter feed, dredging, hydro cyclone feed and general slurry transfer.

The vertical slurry pumps are designed for delivering abrasive, large particle and high-density slurries and applied over the fields such as metallurgy, mining, coal, power, building materials, and environmental protection.

This sump pump casing of type EVM pumps are made of wear-resistant metal. The wear parts are made of high chromium for the EVM series and are rubber lined for the EVR series. According to liquid surface of the slurry pool, the vertical slurry pump transmission shaft and suction pipe could be chosen. The sump pump could operate under the best condition with different speed.
We are the OEM with original drawings and design details for the following brands: Metso, Svedala, Denver, Sala, Orion and Thomas.

?????

Types of OGEM slurry pumps

Our horizontal and vertical pumps serve a wide range of slurry transport applications. We also offer engineering consultation and state-of-the-art pump sizing and selection software.

1)??? OGEM? Horizontal slurry pumps

OGEM’s horizontal pump program offers the newest and widest range of world class rubber lined and hard metal slurry pumps for abrasive pumping applications.
Ideally suited to the most arduous of duties, the excellent hydraulic coverage provided, ensures that the right pump for the job is always available regardless of industry segment, be it Metallic and Industrial Minerals, Coal, Construction, Waste and Recycling, Power, Pulp and Paper, Chemical or general mining.
We are the OEM (Original Equipment Manufacturer) for equipment manufactured under the following brand names, and are the only supplier of parts with the original drawings and design details for: Metso, Svedala, Denver, Sala, Orion and Thomas slurry pumps Vertical slurry pumps

2)??? OGEM vertical pump

The OGEM vertical pump program offers the newest and widest range of world class rubber lined and hard metal slurry pumps for abrasive and difficult pumping applications.
We are the OEM (original equipment manufacturer) for equipment manufactured under.

 

In order to meet the requirements of the market, Ogem develops Series EV sump slurry pumps, which are different from traditional sump pumps with single casing and open impeller, but the double casing and closed impeller. Series EV?pumps could work under the condition of big capacity , high head and high efficiency and the traditional ones only could deal with the small capacity, low head and low efficiency.

Series EV pumps include EVHM, EVHR, EVLM, EVLR, EVZG, EVZJ, EVS and so on. The clear water performance?for every series of products could refer to EHM, EHR, ELM, ELR, EZG, EZJ, and ES and so on. Any requirements, please communicate with us for the detailed application. (Series EVS is of single casing, and is the sump grave pump.)

If the work condition requests, the suction pipe could be added. The pipe length would be selected according to the clients’ requirement. In that case, packing seal should be kept and the shaft seal water should be added. The pressure of?shaft seal water should be a little?higher than of discharge side.

YZ Submersible slurry pump

Any need for slurry pumps, please feel free to contact us and we?ll do our utmost to serve you.