The drilling mud solidscontrol systems are designed and manufactured by OGEM can widely used in ZJ20, ZJ30, ZJ40, ZJ50, ZJ70 system.
It is produced according to <Petroleum and natural gas environmental health and environmental management system>, which can show the spirit of OGEM solidscontrol. The system includes shale shaker, vacuum degasser, desander, desilter, decanter centrifuge, the total five class solidscontrol is a reasonable configuration, make the work more comfortable to keep the high efficiency and stability on the drilling.
OGEM solidscontrol also design and produce HDD mud recycling system, shielding mud process system, CSM drilling fluids system, slurry separation units and so on. For drilling mud tanks system we can use it in various drilling. The different well drilling conditions will request different fluids system.
Drilling fluid system includes mud tanks system, the mud process equipments. All pipelines and electrical lines, cables, and all accessory parts. Such as the ladders, hand rail, guard rail, etc.
What is the mud tanks detail then? Actually, we need almost fluid system, including shaker tank, active, storage tank or mixing tank. Sometimes, there will be also the trip tank, pill tank, and swab or test tank.
The mud tanks are different size or dimension. It depends on whole mud tanks system capacity or flow mud pump flow rate. Whole mud system including different phases and process steps. We need to calculate all information in detail.
So usually the single mud tank effective volume or capacity includes 20m3 and less, 20-40m3, then 40-70m3. Their length can be 8m, 9m, 10m, 11m, 12m, 15m, etc. specific requirement.
When you need, you can check our website and contact us freely!