YZ Submersible slurry pump is with structure of vertical single stage and single suction system overhung centrifugal pump. It is made of abrasion-resistant alloy, It can convey medium with high concentration particle.
There is no bearing and Gland Seal between impeller and pump body, so the slurry pump is maintenance-free and high temperature resistance, the slurry pump is the ideal centrifugal pump for Feeding Shale Shaker from Mud Pit for HDD Mud Recycling.
|Model||Flow rate||Head||Speed||Efficiency||Motor power|
Pump’s drive type: The slurry pump is connected through the flexible coupling and the electric motor, the pump direction of rotation is clockwise from the prime move.
YZ Submersible slurry pump structure
YZ Slurry Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles.
The length of inserting the water by slurry pump is between 800 and 2000; the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.
Buy submersible slurry pump from China manufacturer, OGEM Solids Control system submersible slurry pump. OGEM submersible slurry pump can be used in environmental protective, civil construction, power plant, oil refinery, mineral, cement factory, etc. industry.
It can pump various fluid with corrosiveness and particles, such as sludge, oil dregs, etc. Mud tank submersible slurry pump.
Your best submersible slurry pump for drilling mud circulation system, just go for OGEM .